If you own a forklift, it is important that you maintain it regularly so that it remains for a long time. If you don’t put time and effort into regular maintenance, it can result in early repairs and breakdowns. Forklifts are designed for rough terrains and conditions. A properly looked after machine will be able to perform at optimum level without any problems. To figure out the frequency with which you have to maintain the machine, you will need to consider a few things. For example, you will have to consider the age of the machine, safety requirements, how much damage it is exposed to, past maintenance records, condition of the machine etc. You can ask maintenance personnel on any information regarding repair and maintenance. For example, you can ask and be educated on the care and handling of forklift for sale Australia.
There has to be a maintenance schedule planned out for your forklift. It has to include what is to be done daily, monthly, quarterly, semi-annually and annually. If you stick to a good schedule, there will be fewer repairs and you will also save quite a bit of money on the long run. The daily maintenance should be performed when each shift begins. This would include an inspection for leaks, noticeable damage, condition of the tires, steering, parking brakes, the performance of the safety lights etc. If you find that any part has been damaged or compromised, it is best to replace it with new forklift parts Melbourne. You should raise and lower the forks to check the mast operation. This should be done with and without a load. You should also check engine oil levels and the levels of radiator water and hydraulic fluid.
The monthly maintenance will take place after the machine has seen 200 hours of operation. You should have a skilled mechanic look after the state of the machine by lubricating the chassis and components of the mast, cleaning air filters, adjusting the idle speed of the engine, inspecting the drive belt tension, examining the lift and tilt cylinder operation, replacing engine oil etc. The maintenance programme that takes after every 600 hours is called the quarterly maintenance and it requires cleaning of the radiator exterior, replacement of the fuel filter, inspection of a number of areas such as hydraulic oil pump, hand brake, differential oil, transmission oil etc. You will also have to replace the hydraulic filter and adjust the clutch release bearing. In semi- annual maintenance that is after the use of 1200 hours, the actions required includes inspecting the brake booster operation and replacement of fuel filter, wheel bearing grease and brake fluid.